Lab Scenario: You have a 1 W light bulb in your lab. It puts out light...

Lab Scenario:

You have a 1 W light bulb in your lab. It puts out light of only 1 frequency. The wavelength of this light is 500nm. you set up a detector with a surface area of 1 square centimeter facing the light source at a distance of 100m

a) Find intensity of light due to your 1 W light bulb at the location of the detector. Answer in micro W/m^2.

b) Find the number of photons hitting the detector every second.

c) What is the maximum E field of the E M wave hitting the detector? Answer in mN/C.

d) What is the maximum value of the B field of this E M wave? Answer in pT.

e) How far away would you have to place the detector to only receive 1 photon per second from the light bulb? Answer in km.

Expert Solution

genius_generous answered 2 years ago

You have a 1 W light bulb in your lab. It puts out light of only...

You have a 1 W light bulb in your lab. It puts out light of only 1 frequency. The wavelength of this light is 500nm. you set up a detector with a surface area of 1 square cetimeter facing the light source at a distance of 100m. 1.) find the number of photons hitting the detector every second. 2.) what is the maximum E field of the E M wave hitting the detector? Answer in mN/C. 3.) what is the...

Please include diagrams: a) A 100-W light bulb and a 40-W light bulb are both rated...

Please include diagrams: a) A 100-W light bulb and a 40-W light bulb are both rated at household voltage. i) Which light bulb will be brighter if the two bulbs are connected in parallel and this combination connected to a household voltage source? ii) Which light bulb will be brighter if they are connected in series and this combination connected to a household voltage? b) A battery charges a parallel plate capacitor. After it is fully charged, it is then...

You have a 40- lightbulb and a 100-W bulb. 1. Find the resistances of the 40-W...

You have a 40- lightbulb and a 100-W bulb. 1. Find the resistances of the 40-W bulb. Take that ΔV = 120 V. 2. Find the resistances of the 100-W bulb. Take that ΔV = 120 V. 3. If the two bulbs are connected separately, which of them will be brighter? 4. If the two bulbs are connected in series to a battery source, which of them will be brighter? 5. If the two bulbs are connected in parallel to...

compare the intensity of a 100 W light bulb while you are reading a book to...

compare the intensity of a 100 W light bulb while you are reading a book to the intensity of the sun. what assumptions were made ?

The length of a 60 W, 240 Ω light bulb filament is 60 cm.

The length of a 60 W, 240 Ω light bulb filament is 60 cm. 1.) Remembering that the current in the filament is proportional to the electric field, what is the current in the filament following the doubling of its length? Express your answer using two significant figures. 2.) What is the resistance of the filament following the doubling of its length? Express your answer using two significant figures.

We did a lab studying resistance and Ohm’s Law. In my lab, my light bulb circuit...

We did a lab studying resistance and Ohm’s Law. In my lab, my light bulb circuit element did not obey Ohm’s law b/c my data did not convey a proportional relationship between voltage drop and current. How do I answer: If either or both of your circuit elements did not obey Ohm’s Law, can you think of any reasons for the non-ohmic behavior? In other words what might be happening to one or both of the elements as the applied...

A laser puts out 4.4 W of continuous power at a wavelength of 532 nm. The...

A laser puts out 4.4 W of continuous power at a wavelength of 532 nm. The diameter of the laser beam is 5.1 mm If the laser is pointed toward a pinhole with a diameter of 1.0 mm, how many photons travel through the pinhole per second? Assume that the light intensity is equally distributed throughout the entire cross-divisional area of the beam. (1 W = 1 J/s)

Suppose you have a polarized light source in your lab that has an intensity of 1364...

Suppose you have a polarized light source in your lab that has an intensity of 1364 W/m2, where the electric field oscillates in the z direction. The light travels toward a workbench where you can send it through either one of two polarizing filters. (a) If the light passes through a filter with its transmission axis at an angle of 45.0° from the z direction, what is the intensity of the transmitted light? =? W/m2 (b) If, instead, the light...

A newly replaced light bulb is used until it burns out and then is replaced immediately...

A newly replaced light bulb is used until it burns out and then is replaced immediately by another. The two bulbs are selected randomly from a large lot of bulbs that the manufacturer says have an approximately normal lifetime distribution with a mean of 800 hours and a standard deviation of 100 hours. Describe the distribution of the total lifetime of the two bulbs used in sequence. What is the probability that the sum of the two lifetimes exceeds 1800...

1. If a light bulb is hooked up to batteries, do you think the brightness of...

1. If a light bulb is hooked up to batteries, do you think the brightness of the bulb will depend on how many batteries you use? Explain why or why not 2. If two identical bulbs are hooked up in series and two more identical bulbs are hooked up in parallel, rank the four bulbs from brightest to the least bright. Explain the reasons for your rankings of all four bulbs.

Question