Question

In: Physics

Consider a block (mass 12 kg) at rest on a flat plane. A static coefficient of...

Consider a block (mass 12 kg) at rest on a flat plane. A static coefficient of friction (μs = 0.3) exists between the block and the ground. If a force of 50 N is applied to the block find:

(a) The acceleration of the block.
(b) The velocity of the block after 3 seconds.

(c) The displacement of the block from its starting location after 3 seconds.

Solutions

Expert Solution


Related Solutions

A block of mass m = 3.5 kg is on an inclined plane with a coefficient...
A block of mass m = 3.5 kg is on an inclined plane with a coefficient of friction μ1 = 0.23, at an initial height h = 0.46 m above the ground. The plane is inclined at an angle θ = 42°. The block is then compressed against a spring a distance Δx = 0.11 m from its equilibrium point (the spring has a spring constant of k1 = 39 N/m) and released. At the bottom of the inclined plane...
A block is at rest on an inclined plane whose elevation can be varied. The coefficient...
A block is at rest on an inclined plane whose elevation can be varied. The coefficient of static friction is μs= 0.45, and the coefficient of kinetic friction is μk = 0.18. The angle of elevation θ is increased slowly from the horizontal. At what value of θ does the block begin to slide (in degrees)? What is the acceleration of the block?
A block sits on a flat horizontal surface. The block's mass is 100kg. The coefficient of...
A block sits on a flat horizontal surface. The block's mass is 100kg. The coefficient of static friction is 0.3. The coefficient of kinetic friction is 0.25. Find whatis the friction cone angle between the two surfaces in degree?
A mass of 8 kg rests on a floor with a coefficient of static friction of...
A mass of 8 kg rests on a floor with a coefficient of static friction of 0.88 and coefficient kinetic friction of 0.33. One force is applied vertically downward of 28 Newtons and another force is applied at an angle of 26 degrees below the horizontal. Calculate what the magnitude this force needs to be in order to begin to move the mass. If that force is removed and another force is applied at an angle of 26 degrees above...
A mass of 9 kg rests on a floor with a coefficient of static friction of...
A mass of 9 kg rests on a floor with a coefficient of static friction of 0.92 and coefficient kinetic friction of 0.37. One force is applied vertically downward of 22 Newtons and another force is applied at an angle of 26 degrees below the horizontal. Calculate what the magnitude this force needs to be in order to begin to move the mass. If that force is removed and another force is applied at an angle of 26 degrees above...
A mass of 6 kg is placed on an incline with a coefficient of static friction...
A mass of 6 kg is placed on an incline with a coefficient of static friction of 1.80 and coefficient of kinetic friction of 1.28. No additional forces are acting on it and it is raised slowly from a small angle and it begins to slide at some angle. If 10 degrees is added to this angle, and the mass started from rest from a vertical height of 28 meters, how much longer would it take to travel down the...
A 5.340 kg5.340 kg block of wood rests on a steel desk. The coefficient of static...
A 5.340 kg5.340 kg block of wood rests on a steel desk. The coefficient of static friction between the block and the desk is ?s=0.455μs=0.455 and the coefficient of kinetic friction is ?k=0.155.μk=0.155. At time ?=0,t=0, a force ?=14.7 NF=14.7 N is applied horizontally to the block. State the force of friction applied to the block by the table at times ?=0t=0 and ?>0 Consider the same situation, but this time the external force ?F is 29.6 N.29.6 N. Again,...
A block of mass m1 = 1 kg is initially at rest at the top of...
A block of mass m1 = 1 kg is initially at rest at the top of an h1 = 1 meter high ramp, see Fig. 2 below. It slides down the frictionless ramp and collides elastically with a block of unknown mass m2, which is initially at rest. After colliding with m2, mass m1 recoils and achieves a maximum height of only h2 = 0.33 m going back up the frictionless ramp. (HINT: Solving each part in sequence will guide...
A 4.00 kg block sits at rest on a rough horizontal surface. The coefficient of kinetic...
A 4.00 kg block sits at rest on a rough horizontal surface. The coefficient of kinetic friction between the block and the surface is 0.275. Attached to the right side of the block is a spring which is also attached to a wall farther to the right. The spring has a spring constant of 220 N/m and is initially neither compressed nor stretched. A bullet of mass 50.0 grams is fired at the block from the left side. The bullet...
A box of mass 18.0 kg sits at rest on a horizontal surface. The coefficient of...
A box of mass 18.0 kg sits at rest on a horizontal surface. The coefficient of kinetic friction between the surface and the box is 0.300. The box is initially at rest, and then a constant force of magnitude FF and direction 39.0 ∘∘ below the horizontal is applied to the box; the box slides along the surface. A. What is F if the box has a speed of 6.00 m/s after traveling a distance of 8.00 mm? Express your...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT