Question

In: Physics

Two rectangular pieces of plane glass are laid one upon the other on a table. A...

Two rectangular pieces of plane glass are laid one upon the other on a table. A thin strip of paper is placed between them at one edge, so that a very thin wedge of air is formed. The plates are illuminated at normal incidence by 542 nm light from a mercury-vapor lamp. Interference fringes are formed, with 12.0 fringes/centimeter .

Part A

Find the angle of the wedge .

Solutions

Expert Solution

In the given problem,

Angle of the air wedge between plane glass plates can be calculate using below formula.

  


Related Solutions

Two rectangular pieces of plane glass are laid one upon the other on a table. A...
Two rectangular pieces of plane glass are laid one upon the other on a table. A thin strip of paper is placed between them at one edge, so that a very thin wedge of air is formed. The plates are illuminated at normal incidence by 542nm light from a mercury-vapor lamp. Interference fringes are formed, with 14.0fringes/centimeter . Find the angle of the wedge.
Two flat plates of glass with parallel faces are on a table, one plate on the...
Two flat plates of glass with parallel faces are on a table, one plate on the other. Each plate is 11.0 cm long and has a refrac- tive index of 1.55. A very thin sheet of metal foil is inserted under the end of the upper plate to raise it slightly at that end, in a man- ner similar to that discussed in Example 35.4. When you view the glass plates from above with reflected white light, you observe that,...
A wedge if formed with two thin 20cm pieces of glass. The wedge is 8μm at...
A wedge if formed with two thin 20cm pieces of glass. The wedge is 8μm at its thickest point. The wedge is filled with a liquid with index of refraction n = 1.33. a) When viewed in transmission whats the distance between the corner and the m=7 max b) whats the distances between 2 consecutive bright fringes viewed in reflection c) In the corner likely to be a bright or dark fringe when viewed in transmission d) Draw a diagram...
Two infinite planes of charge lie parallel to each other and to the yz plane. One...
Two infinite planes of charge lie parallel to each other and to the yz plane. One is at x = -2 m and has a surface charge density of ϝ = -3.2 µC/m2. The other is at x = 3 m and has a surface charge density of ϝ = 4.0 µC/m2. Find the electric field for the following locations. (a) x < -2 m = N/C (i hat) (b) -2 m < x < 3 m = N/C (i...
A thermopane window consists of two pieces of glass each 0.1" thick separated by a layer...
A thermopane window consists of two pieces of glass each 0.1" thick separated by a layer of dry, stagnant air .4" thick. • Find the resistance of a 4 ft × 3 ft thermopane window. • Suppose the window is made by fastening an aluminum border .1" thick all around the edge. Find the total resistance for this configuration. • As an alternative to the aluminum, we might use a border of .75" thick white pine. Find the total resistance...
A double pane window consists of two pieces of glass each of 8 mm thick that...
A double pane window consists of two pieces of glass each of 8 mm thick that enclose an air space of 8 mm thick. The window separates room air at 18°C from outside ambient air at -8°C. The convection coefficient associated with the inner (room-side) surface is 12W/m2 .K. The thermal conductivity of the glass is kg=1.35 W/m. K and that of the air is ka=0.027 W/m. K Q1- If the outside air convection coefficient is ho = 76 W/m2...
Consider a wire of length 4 ft that is cut into two pieces. One pieces form...
Consider a wire of length 4 ft that is cut into two pieces. One pieces form a radius for circle and other forms a square of side x. 1) choose x to maximize the sum of area. 2) choose x to minimize the sum of their areas. WHERE I got x=4/(x+pie).But i am not sure...
1.) Two 100 g pieces of metal, one copper and one aluminum, that start at the...
1.) Two 100 g pieces of metal, one copper and one aluminum, that start at the same temperature are put in an oven for 2 minutes. When they are taken out of the oven, the copper feels warmer than the aluminum. This can be explained by the relative values of specific heat for the two metals. Copper must have a [ Select ] ["higher", "lower"] specific heat capacity than the aluminum, because [select one: higher heat capacity men a high...
A 20 foot piece of wire is to be cut into two pieces. One piece is...
A 20 foot piece of wire is to be cut into two pieces. One piece is used to form a circle and the other is used to form a square (imagine fence used to make a square corral and a circular corral). What lengths should be cut to make each shape in order to maximize the sum of the areas of the two shapes? Let x = the length of the part of the wire that will be used to...
A wire 370 in. long is cut into two pieces. One piece is formed into a...
A wire 370 in. long is cut into two pieces. One piece is formed into a square and the other into a circle. If the two figures have the same area, what are the lengths of the two pieces of wire (to the nearest tenth of an inch)?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT