Question

In: Mechanical Engineering

Fluid Mechanics - True or False 1) Reynolds number represents the ratio of viscous force to...

Fluid Mechanics - True or False

1) Reynolds number represents the ratio of viscous force to the inertia force.
2) The entrance length (Le) for turbulent flow is greater than that for laminar flow for the same pipe diameter.
3) Increase the fluid viscosity leads to decrease the turbulence.
4) For laminar steady flow between parallel fixed plates, the pressure drop increase with increasing the thickness of the fluid layer between them.
5) For laminar steady flow for pipe, the pressure drop increase with increasing the pipe diameter.
6) For the same Reynolds number, friction factor for steady laminar flow between parallel plates is greater than that for pipe flow.
7) For turbulent flow, the thickness of viscous sublayer is greater than the thickness of inertial sublayer.
8) Darcy -Weisbach equation can be used for calculating the head of losses for both laminar and turbulent flow.
9) Minor losses important only for turbulent flow.
10) Minor losses for entrance flow conditions is less than that for exit flow conditions.

Only state if its False or True for each point.

Solutions

Expert Solution

Hello student as u mentioned to say only true or false but according to me explaination is required for your concept clearification so I had also explained reason behind it.

Please rate me thumbs up for the solution.


Related Solutions

Capillary number is proportional to { (viscous force) / (surface tension force) } and is used...
Capillary number is proportional to { (viscous force) / (surface tension force) } and is used in momentum transfer in general and atomization and 2-phase flow in beds of solids calculations in particular. It is equivalent to (We/Re). ___________ Which is the friction factor for ReD = 600 and e/D = 0.002 in pipe flow? ___________ What is the friction factor for ReD= 3 x 105 and D/e = 5000 in pipe flow?
(1) [1 Point] True or False: A shock wave is a thin region of highly viscous...
(1) [1 Point] True or False: A shock wave is a thin region of highly viscous flow, and the flow through the shock is adiabatic but nonisentropic. (2) [1 Point] True or False: For hypersonic flow, the ratio of specific heats for air (??) can be assumed to be constant. (3) [1 Point] True or False: A normal shock wave is a shock wave that makes an oblique angle with respect to the upstream flow. (4) [1 Point] True or...
FLUID MECHANICS An aircraft flying at an altitude of 5 km with a Mach number of...
FLUID MECHANICS An aircraft flying at an altitude of 5 km with a Mach number of 0.15. Calculate the velocity of the aircraft? (+1 point) Calculate the pitot tube measurement reading at the nose using Bernoulli (+1 point) and Isentropic equations (+1 point) separately. Compare them!!! Calculate pressure coefficient (Cp) at the nose(stagnation) point. (+0.5 point) Calculate the pressure coefficient (Cp) at the point where Mach number reaches 0.25 (+1 point)
ASSIGNMENT 1 TOPIC: INTRODUCTION OF FLUID MECHANICS GROUP MEMBERS Name Matrix Number QUESTION 1: 10 MARKS...
ASSIGNMENT 1 TOPIC: INTRODUCTION OF FLUID MECHANICS GROUP MEMBERS Name Matrix Number QUESTION 1: 10 MARKS In your own words, explain what have you learnt from fluid mechanics course. NAME INDIVIDUAL REFLECTION QUESTION 2: 40 MARKS Refined crude oil has been used to lubricate moving parts in a wide variety of machines and engines. These petroleum-based lubricants are extracted from natural crude oil, and must be refined, desalted, dewaxed, and distilled from crude feedstock. However, recently, engineers are moving towards...
True or False - why? 1. Japan is a wheat importer that represents a small share...
True or False - why? 1. Japan is a wheat importer that represents a small share in the world demand for wheat. Japan lowers its wheat tariff from 20% to 10%. Question: Japanese consumption of wheat increases as a result of the tariff reduction. 2. Japan is a wheat importer that represents a small share in the world demand for wheat. Japan lowers its wheat tariff from 20% to 10%. Question: The world price of wheat falls 3. Suppose the...
1. (TRUE or FALSE?) Compound interest decreases as the number of years increases. 2. (TRUE or...
1. (TRUE or FALSE?) Compound interest decreases as the number of years increases. 2. (TRUE or FALSE?) The process of converting the initial amount into a future value is called discounting. 3. (TRUE or FALSE?) The future value is simply the current value of a future cash flow that has been discounted at the appropriate discount rate.
QUESTION 1: True or False A) Changes in the stock price and the number of shares...
QUESTION 1: True or False A) Changes in the stock price and the number of shares available will evoke changes in the “market cap.” True False B) After an IPO, the value of a company’s securities is set by the market through the laws of supply and demand True False C) An example of direct financing is when a company raises funds from commercial banks, insurance companies, pension funds, and venture capital firms. True False D) The concept of “currency...
True or False 1. The debt ratio is computed by dividing total liabilities by current assets....
True or False 1. The debt ratio is computed by dividing total liabilities by current assets. 2. Working capital is the excess of current assets over current liabilities. 3. From a creditor's point of view, the lower the debt ratio; the safer the creditor's position. 4. The trend in ratios is usually more useful than looking at a single year's ratio.
True and False True/False Write True or False before the statement. 1. Gypsum is the brand...
True and False True/False Write True or False before the statement. 1. Gypsum is the brand name for sheetrock. 2. Coreboards and liner boards come in 2-foot widths. 3. Adhesives are not used for bonding gypsum board directly to supports. 4. Supplemental fasteners should be used with contact adhesives. 5. Gypsum panels are applied first to ceilings and then to the walls. 6. The floating angle method of drywall application omits fasteners in the corner intersection of the ceilings and...
1)True or False: Ambiguity is a type of vagueness True False 2)True or False: When determining...
1)True or False: Ambiguity is a type of vagueness True False 2)True or False: When determining whether a report of an argument should be treated as an argument, it is important to consider the context in which the report is made. True True False 3) True or False: In a V argument with two premises, if one of the premises is false, then the argument is definitely weak True False 4) True or False: A report of an argument can...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT