B- Design an unbaffled tank to mix a liquid of sp.gr.= 1.297 and viscosity= 94.5 c.p....

B- Design an unbaffled tank to mix a liquid of sp.gr.= 1.297 and
viscosity= 94.5 c.p. NRe = 7.6*10^5, NFr = 1.7
Calculate the power required.
[From chart if NRe > 10^5 then Np=1.8]

Expert Solution

Amanda K answered 7 months ago

a. Design a concrete mix for construction of a water tank using ACI Committee 211.1-year 1991....

a. Design a concrete mix for construction of a water tank using ACI Committee 211.1-year 1991. The specified design strength of concrete is 30 MPa at 28 days. Standard deviation can be taken as 4 MPa. The specific gravity of fine aggregate and coarse aggregate are 2.65 and 2.7 respectively. The dry rodded bulk density of the coarse aggregate is 1600 kg/m3 and the fineness modulus of fine aggregate is 2.80. Ordinary Portland cement (Type I) will be used. A...

Observation and results and comclusion of viscosity of a liquid by the falling sphere method

Example of Mix design proportion calculation • You need to design the mix proportion of a...

Example of Mix design proportion calculation • You need to design the mix proportion of a grade 40 for a column with workability of 50 mm slump and w/c not more than 0.55. The maximum size of gravel aggregate is 10 mm and the fine aggregate is quarry blast sand. The moisture content of the aggregate is as follow: • The gravel aggregate is in moist condition with moisture content of =3.5%, dry density = 1700 kg/m3 • The sand...

Design a concrete mix for the superstructure of a building using DoE mix design method requiring...

Design a concrete mix for the superstructure of a building using DoE mix design method requiring a characteristic strength of 40MPa at 28days and a slump of 30-60mm. The materials available are ordinary Portland cement, and uncrushed fine and coarse aggregates of specific gravity of 2.65. The maximum nominal size of coarse aggregate is 10mm and fine aggregate confirms to the grading zone III. Neglect the effect of standard deviation and other factors.

Q5) Prepare a mix design (Use ACI Method of Mix Design) which will be used for...

Q5) Prepare a mix design (Use ACI Method of Mix Design) which will be used for a pier located at the South Carolina. South Carolina is hot and humid with daytime temperatures averaging between 30–34 °C in most of the state and overnight lows averaging 21–23 °C on the coast and from 19–23 °C inland. Winter temperatures are much less uniform in South Carolina. Coastal areas of the state have very mild winters with high temperatures approaching an average of...

In microfiltration what is Dependence of the TMP on the permeate flow, liquid viscosity, membrane resistance,...

In microfiltration what is Dependence of the TMP on the permeate flow, liquid viscosity, membrane resistance, and cake resistance.

Design a concrete mix by using ACI Method of Mix Design having 28-day characteristic mean strength...

Design a concrete mix by using ACI Method of Mix Design having 28-day characteristic mean strength of 28 MPa for a deck of a residential building at Nebraska. Dry weather and gradually warming temperatures may be expected throughout the working week. Fresh concrete composed of a slump of 90 mm and maximum aggregate size of 25 mm. Determine the amount of water reducing admixture to be used for 0.24 % and 0.35 %. Deck is a flat surface capable of...

Q1) Design a concrete mix by using ACI Method of Mix Design having 28-day characteristic mean...

Q1) Design a concrete mix by using ACI Method of Mix Design having 28-day characteristic mean strength of 27 MPa for a deck of a residential building at Nebraska. Dry weather and gradually warming temperatures may be expected throughout the working week. Fresh concrete composed of a slump of 90 mm and maximum aggregate size of 25 mm. Determine the amount of water reducing admixture to be used for 0.24 % and 0.65 %. Deck is a flat surface capable...

A large tank containing a mystery liquid is filled to a depth of L = 35...

A large tank containing a mystery liquid is filled to a depth of L = 35 m. The upper surface of the liquid is exposed to the atmosphere (of density 1.2 kg/m3). A pipe of cross-sectional area Ain = 0.01 m2 is inserted in to the liquid. The other ’outlet’ end of the pipe, of smaller cross sectional area Aout = 0.005 m2, is placed outside the liquid at a height of h = 2 m below the surface of...

A propane tank with 75 gallons of liquid propane is at 50 F in a sealed...

A propane tank with 75 gallons of liquid propane is at 50 F in a sealed tank. The tank develops a significant leak and propane escapes and vaporizes in a short period of time. To solve this problem you must use the propane tables not the common liquid properties. What is the temperature near the hole in the propane tank due to the escaping propane in Fahrenheit to three significant digits? . Include a minus sign if appropriate. How many...

Question