Question

In: Other

Q1.The results of a batch settlement analysis carried out on a mixed suspension are given in...

Q1.The results of a batch settlement analysis carried out on a mixed suspension are given in the following Table 1.

      Plot the cumulative velocity profile of the suspended solids and compute the predicted removal rate by settlement.

Number Sample depth(m) Sample time(h) SS in sample (mg/l)
1,2,3 1,2,3 0 222(averaged)
4 1 1 140
5 1 3 108
6 1 6 80
7 2 1 142
8 2 3 110
9 2 6 106
10 3 1 142
11 3 3 130
12 3 6 124
13 4 1 147
14 4 3 126
15 4 6 114

           

Solutions

Expert Solution


Related Solutions

8) Accelerated lifetime tests are carried out for a batch of 200 thermocouples. The mean lifetime...
8) Accelerated lifetime tests are carried out for a batch of 200 thermocouples. The mean lifetime is found to be 936 h with a standard deviation of 28 h. The smallest and largest measurements in the sample are 860 and 1012 h. The measurements are divided into 9 data bins with boundaries at 859.5, 876.5, 893.5, 910.5, 927.5, 944.5, 961.5, 978.5, 995.5, 1012.5. The measurement count in bin 1 from 869.5 days to 886.5 days is 3 and the count...
The following reversible gas-phase reaction is carried out in a 10 L batch reactor. A <->C...
The following reversible gas-phase reaction is carried out in a 10 L batch reactor. A <->C -rA = CA – 0.5CC [mol/(L h)] Determine the pressure, temperature, and gas phase composition (mole fractions) in the reactor after 1 hour of operating adiabatically given the following initial conditions and physical properties and the assumption of ideal gas behavior: P0 = 100 kPa, yA0 = 0.5, yC0 = 0.1, yinert=0.4, T0 = 500 K. cpA = cpC = 10 J/mol K, cpinert...
The question “Was the analysis carried out systematically and comprehensively?” is most relevant to which of...
The question “Was the analysis carried out systematically and comprehensively?” is most relevant to which of the qualitative quality criteria discussed in class? Confirmability Dependability Transferability Credibility
A process is carried out at constant pressure. Given that ∆E is positive and ∆H is negative,
A process is carried out at constant pressure. Given that ∆E is positive and ∆H is negative, D) the system loses heat and contracts during the process Which equation represents the reaction that corresponds to the standard enthalpy of formation b of CHCl3 at 25° (∆Hf of CHCl3)?C) 2 C(s) +H2(g) +3Cl2(g) ---> 2CHCl3(l) The reaction 4 Ag(s) +O2(g) ---->2AgO(s) favors Ag2O at low temperature, but it favors Ag and O2 at high temperatures. How can this be explained in...
An analysis carried out during and shortly after the project life cycle that attempts to capture...
An analysis carried out during and shortly after the project life cycle that attempts to capture positive and negative learning is represented in which of the following? Performance evaluation Lessons learned Scenario analysis Strategic objectives Variance analyses
Using SPSS complete an analysis for the following question. Print out your results and take a...
Using SPSS complete an analysis for the following question. Print out your results and take a picture of the results with your interpretation on the printout. You can type the interpretation or handwrite the interpretation. The subject line should be SPSSQ4 last name first name. 1. A gerontologist investigating aspects of aging wanted to determine if leaner (not fat) rats might have longer life expectancies. She randomly assigned newborn rats to 1 of 3 treatment groups: unlimited food, 90% of...
Mix the aggregates given the results of sieve analysis test in Table 1 in appropriate proportions,...
Mix the aggregates given the results of sieve analysis test in Table 1 in appropriate proportions, show the granulometry curves of each aggregate and mixture in Figure 2, calculate the fineness modulus (FM) of the mixture. Sieve Size (mm) 31,5 16 8 4 2 1 0,5 0,25 A1(Passing) %P1 100 90 85 55 10 0 0 0 A2 (Retained, g) 0 0 0 0 200 300 200 100 A3(100-%P3) 0 60 95 100 100 100 100 100
Given The following results from LINEAR REGRESSION Analysis for the variables X and Y Slope= 12.7...
Given The following results from LINEAR REGRESSION Analysis for the variables X and Y Slope= 12.7 y-intercept =3.2 n=10 SE=4.3 The equation of the regression line is …… and 95% confidence interval for the slope is…. (A)Y=3.2+12.7X, and (3.675,12.768) (B)Y=12.7+3.2X, and (2.784,12.745) (C)Y=3.2+12.7X, and (2.784,22.616)
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT