Question

In: Physics

A person is pulling on a block with a force of 100N at an angle of...

A person is pulling on a block with a force of 100N at an angle of 30 degrees with the horizontal (+x direction). If the mass of the block is 10kg and the coefficient of friction is uk=0.2, and the block undergoes a displacement of 15 m in the +x direction, what is the net work done on the block?

a.) -294 J

b.) 294 J

c.)1005 J

d.)1299 J

e.)1593 J

Solutions

Expert Solution


Related Solutions

A person is pulling a 40 kg block of ice across an icy surface at a...
A person is pulling a 40 kg block of ice across an icy surface at a 25 degree angle. If the person is pulling with a force of 42 N, what is the magnitude of the acceleration of the block of ice? you may ignore drag, but not friction. Us=.1 and Uk=.03 I got this wrong on the homework and my teacher said that the normal forces does not equal mg here and that the tension is "pulling up"
Using a crowbar, a person can remove a nail by exerting little force, whereas pulling directly...
Using a crowbar, a person can remove a nail by exerting little force, whereas pulling directly on the nail requires a large force to remove it (you probably can't). Why? Using a crowbar, a person can remove a nail by exerting little force, whereas pulling directly on the nail requires a large force to remove it (you probably can't). Why? A.The applied force is at a large distance from the pivot, giving rise to a large torque. B.The applied force...
A 40.0N force at an angle of 40.0° pulls a 5.00 kg block, itself attached to...
A 40.0N force at an angle of 40.0° pulls a 5.00 kg block, itself attached to a spring (k = 30.0N/m). The block and the surface have a kinetic friction coefficient of 0.200. Initially, the system is at rest and the spring is at its natural length. When the block has moved 40.0 cm to the right, and using the work-energy principle, find: a) the thermal energy dissipated. b) the work done by the external force. c) the work done...
Muscle A has a force of 450 N and is pulling on a bone at an...
Muscle A has a force of 450 N and is pulling on a bone at an angle of 15 degrees. Muscle B has a force of 600 N and is pulling on the same bone at the same spot, but at an angle of 30 degrees. Muscle C has a force of 325 N and is pulling at the same spot with an angle of pull of 10 degrees. What is the amount of rotary force produced by Muscle A?...
A man is pulling a 120 lb wooden box by a rope with a force of...
A man is pulling a 120 lb wooden box by a rope with a force of 80 lb along a wooden floor. The rope is 45 degrees from the horizontal. The coefficient of of dynamic friction between wood to wood surfaces is Uk=0.45. If the box initially starts from rest, what will the box's (a) acceleration,and (b) velocity after 8 sec? (c) max power and (d) average power. Make sure to have FDB and kinetic diagrams, and unit base vectors.
A block is at rest on a plank whose angle can be varied. The angle is...
A block is at rest on a plank whose angle can be varied. The angle is gradually increased from 0 deg. At 29.4°, the block starts to slide down the incline, traveling 3.30 m down the incline in 1.50 s. a) Calculate the coefficient of static friction between the block and the plank. b) Calculate the kinetic coefficent of friction between the block and the plank.
A child is pulling a friend in a wagon. She exerts a force of 80 N...
A child is pulling a friend in a wagon. She exerts a force of 80 N on the wagon handle, which rises at an angle of 40° above the horizontal. The mass of her friend plus the wagon is 45 kg. Assuming there is no friction, find the acceleration of the wagon.
A block is at the base of of a ramp of angle 35°. The ramp is...
A block is at the base of of a ramp of angle 35°. The ramp is 5 m. if the block is initially given a velocity of 12 m/s up the ramp, how far from the ramp will the block land?
As a mechanical engineer, design a hydraulic circuit with pushing and pulling force using a lever....
As a mechanical engineer, design a hydraulic circuit with pushing and pulling force using a lever. Please consider a minimal usage of components in your design. Explain the operation based on directional control valve position. Use symbols in accordance to ISO 1219. A manufacturing machine supplier needs your help to design a hydraulic circuit for 2 cylinder output that operate in sequence, one after another. Please consider a minimal usage of components in your design. Explain the operation based on...
A stonemason is dragging a 60-kg marble block 4 m across a floor by pulling on...
A stonemason is dragging a 60-kg marble block 4 m across a floor by pulling on a rope attached to the block. He pulls with a horizontal force of 210 N. The coefficient of kinetic friction between the block and the floor is 0.30.  The next five questions have to do with this scenario.  Draw yourself a free-body diagram on the block. How much work was done by the stonemason in dragging this block? a. 100 J b. 560 J c. 840...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT