Question

In: Economics

list the raw materials used for soccer boots

list the raw materials used for soccer boots

Solutions

Expert Solution

Foam consists primarily of polyol and some water. Shoe outsoles can be made from a number of materials including natural rubber, leather, polyurethane, and PVC compounds. It depends entirely on what kind of shoe that you like. Soccer boot soles are made of polyurethane soles.

Upper Metarial: When it comes to uper part, different players taste in their soccer cleats. For soccer boots, from leather to synthetic, there are various choices. A list of all the major materials and their key characteristics is given below;

Kangaroo leather: Boots made from upper kangaroo leather give your feet a comfortable feel. Kangaroo leather uppers are also very durable. However, due to costs and protestors, very few models are now available.

The main leather: Source are calfskin and horse. Natural leather boots provide the ball with a special feel and are worth considering

Synthetic leather: Diadora football and other leading manufacturers all manufacture more and more synthetic leathers. There's always a gap even then, and you don't get the same ball feeling. Because these are synthetic, the good news is that the manufacturers can incorporate additional features such as waterproofing. We will see synthetic leather approaching natural leather in the ball look over the next few years.

Synthetic: Synthetic uppers have a totally different leather look. There is also no time limit, so keep that in mind when buying a pair. The materials are thin and the feeling is very different for the ball.

Please don't forget to like if the solution is useful. Thank you!



Related Solutions

Raw materials purchased on account, $210,000. Raw materials used in production, $191,000 ($152,800 direct materials and...
Raw materials purchased on account, $210,000. Raw materials used in production, $191,000 ($152,800 direct materials and $38,200 indirect materials). Accrued direct labor cost of $50,000 and indirect labor cost of $21,000. Depreciation recorded on factory equipment, $104,000. Other manufacturing overhead costs accrued during October, $130,000. The company applies manufacturing overhead cost to production using a predetermined rate of $7 per machine-hour. A total of 76,300 machine-hours were used in October. Jobs costing $513,000 according to their job cost sheets were...
Required: Calculate the cost of raw materials used in production.
                                               Costs Raw materials purchased $ 75,000 Direct Labor   55,000 Indirect labor     33,000 Factory equipment maintenance and depreciation     15,000 Factory rent     36,000 Factory supplies       6,000 Selling & administrative expenses 100,000 Inventories Beginning Balance Ending Balance Raw Materials $ 5,000 $20,000 Work in Process 25,000 30,000 Finished Goods 20,000 35,000 Required:   Calculate the cost of raw materials used in production. Required:  Calculate the cost of goods manufactured Calculate the cost of goods sold. Required:  Calculate the prime costs   Calculate the conversion costs.
Using the following information, compute the direct materials used. Raw materials inventory, January 1                          $&
Using the following information, compute the direct materials used. Raw materials inventory, January 1                          $     20,000 Raw materials inventory, December 31                          40,000 Work in process, January 1                                                    18,000 Work in process, December 31                                            12,000 Finished goods, January 1                                                      40,000 Finished goods, December 31                                              32,000 Raw materials purchases                                                 1,400,000 Direct labor                                                                                 560,000 Factory utilities                                                                         150,000 Indirect labor                                                                                50,000 Factory depreciation                                                              400,000 Operating expenses                                                                420,000 a. $1,460,000. b. $1,420,000. c. $1,400,000. d. $1,380,000. Why it's D ????
The types of raw materials used to construct stone tools found at an archaeological site are...
The types of raw materials used to construct stone tools found at an archaeological site are shown below. A random sample of 1486 stone tools were obtained from a current excavation site. Raw Material Regional Percent of Stone Tools Observed Number of Tools as Current excavation Site Basalt 61.3% 890 Obsidian 10.6% 162 Welded Tuff 11.4% 175 Pedernal chert 13.1% 212 Other 3.6% 47 Use a 1% level of significance to test the claim that the regional distribution of raw...
The types of raw materials used to construct stone tools found at an archaeological site are...
The types of raw materials used to construct stone tools found at an archaeological site are shown below. A random sample of 1486 stone tools were obtained from a current excavation site. Raw Material Regional Percent of Stone Tools Observed Number of Tools as Current excavation Site Basalt 61.3% 900 Obsidian 10.6% 153 Welded Tuff 11.4% 165 Pedemal chert 13.1% 215 Other 3.6% 53 Use a 1% level of significance to test the claim that the regional distribution of raw...
The types of raw materials used to construct stone tools found at an archaeological site are...
The types of raw materials used to construct stone tools found at an archaeological site are shown below. A random sample of 1486 stone tools were obtained from a current excavation site. Raw Material Regional Percent of Stone Tools Observed Number of Tools as Current excavation Site Basalt 61.3% 925 Obsidian 10.6% 154 Welded Tuff 11.4% 174 Pedernal chert 13.1% 189 Other 3.6% 44 Use a 1% level of significance to test the claim that the regional distribution of raw...
The types of raw materials used to construct stone tools found at an archaeological site are...
The types of raw materials used to construct stone tools found at an archaeological site are shown below. A random sample of 1486 stone tools were obtained from a current excavation site. Raw Material Regional Percent of Stone Tools Observed Number of Tools as Current excavation Site Basalt 61.3% 894 Obsidian 10.6% 152 Welded Tuff 11.4% 178 Pedemal chert 13.1% 217 Other 3.6% 45 Use a 1% level of significance to test the claim that the regional distribution of raw...
The types of raw materials used to construct stone tools found at an archaeological site are...
The types of raw materials used to construct stone tools found at an archaeological site are shown below. A random sample of 1486 stone tools were obtained from a current excavation site. Raw Material Regional Percent of Stone Tools Observed Number of Tools as Current excavation Site Basalt 61.3% 904 Obsidian 10.6% 165 Welded Tuff 11.4% 163 Pedernal chert 13.1% 209 Other 3.6% 45 Use a 1% level of significance to test the claim that the regional distribution of raw...
The types of raw materials used to construct stone tools found at an archaeological site are...
The types of raw materials used to construct stone tools found at an archaeological site are shown below. A random sample of 1486 stone tools were obtained from a current excavation site. Raw Material Regional Percent of Stone Tools Observed Number of Tools as Current excavation Site Basalt 61.3% 888 Obsidian 10.6% 157 Welded Tuff 11.4% 180 Pedernal chert 13.1% 208 Other 3.6% 53 Use a 1% level of significance to test the claim that the regional distribution of raw...
The types of raw materials used to construct stone tools found at an archaeological site are...
The types of raw materials used to construct stone tools found at an archaeological site are shown below. A random sample of 1486 stone tools were obtained from a current excavation site. Raw Material Regional Percent of Stone Tools Observed Number of Tools as Current excavation Site Basalt 61.3% 899 Obsidian 10.6% 168 Welded Tuff 11.4% 177 Pedemal chert 13.1% 180 Other 3.6% 62 Use a 1% level of significance to test the claim that the regional distribution of raw...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT