A photovoltaic solar collector with an area of 2 m2 is tracking the sun for 8...

A photovoltaic solar collector with an area of 2 m2 is tracking the sun for 8 hours on a sunny day. Assume that, the solar flux on the collector is constant through the day as 1000W/m2. PV Solar collector properties are:

FF: %75, Efficiency: %18.2

V (MPP, nominal) = 28 V

V (Open Circuit) = 32 V

a) What is the total amount of energy converted to electricity?

b) Assume a reasonable price for the cost of electricity and then calculate the value of electricity ($) produced for whole day.

c) Calculate the generated current and Short Circuit Current.

Expert Solution

Above questions can be solved as

genius_generous answered 8 months ago

Is there any difference in any photovoltaic property by the size of solar exposure area?

Draw block diagram of a sun tracking system for a solar power system. Also mention the...

Draw block diagram of a sun tracking system for a solar power system. Also mention the component clearly. Note: give a small description of its working.

Near the equator, the Sun is approximately straight overhead at noon, and around 1000 W/m2 solar...

Near the equator, the Sun is approximately straight overhead at noon, and around 1000 W/m2 solar irradiance reaches Earth. Around this time of day, assuming ambient temperature of 40C, and a 10m x 10m x 2m-tall greenhouse with ¼”-thick glass walls that reflect away 20% of the incoming sunlight, and only thinking of conductive losses, estimate the maximum temperature reached in the interior of the greenhouse. Hint: when are losses and sources balanced? glass conductivity is 1.05 W/(m k)

How useful is M2 in tracking inflation? Explain.

What are the riisk and uncertainty of 1 solar photovoltaic (PV) 2 Power souce Diesel Engines

benift of small-scale solar photovoltaic power with battery storage ?

What is the difference between solar photovoltaic cells and solar thermal collectors? How do they work?...

What is the difference between solar photovoltaic cells and solar thermal collectors? How do they work? Which one is better in terms of cost and effciency and which one will we become more used in the future?

Estimate the top heat loss coefﬁcient of a collector that has the following speciﬁcations: Collector area=...

Estimate the top heat loss coefﬁcient of a collector that has the following speciﬁcations: Collector area= 2m2 Collector slope =35⁰ Number of glass covers = 3 Thickness of each glass cover =4 mm. Thickness of absorbing plate =0.5 mm. Space between glass covers = 20 mm. Space between inner glass cover and absorber =40 mm. Mean absorber temperature, Tp =80 ⁰C Ambient air temperature =15 ⁰C Absorber plate emissivity, εp =0.10. Glass emissivity, εg =0.88 Wind velocity = 2.5m/s. Assuming...

Write the Pros and cons of the second and third generation of the solar photovoltaic cells.

A solar collector installed on the roof of a SoCal home is used to heat water...

A solar collector installed on the roof of a SoCal home is used to heat water flowing through ducts attached at the back of the collector. The absorbing surface has an area of 2 m2 with an emissivity of 0.9. The surface temperature of the absorber is 35 °C, and solar radiation is incident on the absorber at 450 W/m2. Temperature of surrounding air is 22 °C. Heat transfer coefficient at the absorber surface is 5 W/m2·K. If water is...

Question