Question
In: Civil Engineering
A layer of saturated cohesive soil (16m deep) has a water content of 46 % ,...
A layer of saturated cohesive soil (16m deep) has a water content of 46 % , and the specific gravity of solid particles of the soil is 2.65. Unit weight of water is 9.81 kN/m3
Determine
volume of air, weight of water (Ww) in terms of weight of solid, volume of water (Vw) in terms of weight of solid, volume of solid in terms of weight of solid (Ws), weight of water, Assume total volume of soil is 1m3. Determine the weight of solid (Ws) , weight of water in KN and bulk unit weight of soil
Solutions
Ally Wells answered 11 months agoRelated Solutions
Laboratory compaction test results for a cohesive soil are given in the following table: Water Content...
Laboratory compaction test results for a cohesive soil are given in
the following table:
Water Content (%)
Dry Density (pcf)
12.0
116.2
13.6
117.6
14.8
117.9
16.1
116.5
17.2
113.6
Plot Diagram with labels and sample test
labels
Specifications call for a fill dry density of 114 pcf and
further require that the fill be compacted at optimum water content
for the field compactive effort. For the following field density
test results on a fill, explain how you alter...
A 4m thick clayey layer was initially water saturated with water content w = 34%, and...
A 4m thick clayey layer was initially water saturated with water
content w = 34%, and in situ effective stress σzo’ = 31 kPa.
Clearly state your assumptions to determine: a)
The total settlement in this clay layer, if the final void ratio
after consolidation is ef = 0.75. b) If OCR = 2.2,
the construction of an embankment at this site induces 48.5 kPa
additional load, what will be the total settlement at this site?
Assuming Cc = 0.3...
A soil has a natural water content of 10%, specific gravity of 2.65, and porosity of...
A soil has a natural water content of 10%, specific gravity of
2.65, and porosity of 0.45.
a) Find the dry unit weight and degree of saturation.
b) If the optimum water content for the soil from a standard
proctor was 20%, how much water would have to be added to 1m^3 of
the soil to increase the water content to an optimum level?
: A wet soil sample with a water content of 15% and percentage air voids of...
: A wet soil sample with a water content of 15% and percentage
air voids of 20% was oven dried. If the soil sample is cylindrical
in dimension with length as 100 mm and diameter as 50 mm, then how
much mass of water is present in the soil? Also calculate the mass
of soil. Assume specific gravity of soil is 2.69 Interpret your
answer and conclude how water content influences the unit weight of
soil.
The following data represent soil water content (percentage of water by volume) for independent random samples...
The following data represent soil water content (percentage of
water by volume) for independent random samples of soil taken from
two experimental fields growing bell peppers. Soil water content
from field I: x1; n1 = 72 15.1 11.3 10.1 10.8 16.6 8.3 9.1 12.3 9.1
14.3 10.7 16.1 10.2 15.2 8.9 9.5 9.6 11.3 14.0 11.3 15.6 11.2 13.8
9.0 8.4 8.2 12.0 13.9 11.6 16.0 9.6 11.4 8.4 8.0 14.1 10.9 13.2
13.8 14.6 10.2 11.5 13.1 14.7 12.5...
The following data represent soil water content (percentage of water by volume) for independent random samples...
The following data represent soil water content (percentage of
water by volume) for independent random samples of soil taken from
two experimental fields growing bell peppers.
Soil water content from field I: x1; n1 = 72
15.2 11.3 10.1 10.8 16.6 8.3 9.1 12.3 9.1 14.3 10.7 16.1 10.2
15.2 8.9 9.5 9.6 11.3 14.0 11.3 15.6 11.2 13.8 9.0 8.4 8.2 12.0
13.9 11.6 16.0 9.6 11.4 8.4 8.0 14.1 10.9 13.2 13.8 14.6 10.2 11.5
13.1 14.7 12.5...
The following data represent soil water content (percentage of water by volume) for independent random samples...
The following data represent soil water content (percentage of
water by volume) for independent random samples of soil taken from
two experimental fields growing bell peppers. Soil water content
from field I: x1; n1 = 72 15.3 11.3 10.2 10.8 16.6 8.3 9.1 12.3 9.1
14.3 10.7 16.1 10.2 15.2 8.9 9.5 9.6 11.3 14.0 11.3 15.6 11.2 13.8
9.0 8.4 8.2 12.0 13.9 11.6 16.0 9.6 11.4 8.4 8.0 14.1 10.9 13.2
13.8 14.6 10.2 11.5 13.1 14.7 12.5...
What is the gravimetric water content, of a soil sample having a wet mass of 1.63...
What is the gravimetric water content, of a soil sample having a
wet mass of 1.63 kg and a dry mass of 1.33 kg? And then answer,
what is the volumetric water content of this sample if its
dimensions are known to be 0.1m x 0.1m x 0.1m?
Please show workings and explain each step.
A mixture of saturated liquid water and saturated steam at T = 120 °C has a...
A mixture of saturated liquid water and saturated steam at
T = 120 °C has a specific enthalpy of 2000 kJ⁄kg. What is
the quality of this mixture?
if you could show how to do it, that'd be great.
A high water-table was encountered in low-fine content soil during the excavation. This may endanger slope...
A
high water-table was encountered in low-fine content soil during
the excavation. This may endanger slope stability and result in an
accident. Suggest the most suitable groundwater control technique
to prevent this accident and explain its details
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- A)Given a generic array with ‘n’ items (not only integers). Give a solution for checking whether...
- Explain virtualization as a key technology in cloud computing environments, as well as the purpose of...
- A system is set up to take raw grading information from the console and calculate a...
- I have an 8 by 8 array that has values ranging from 1-64. I am wanting...
- The background information and instruction of the question is provided below, and i only asked for...
- Which business or industry sectors have the most startups companies that consider a small and medium...
- 16. Cost of trade credit Firms usually offer their customers some form of trade credit. This...
ADVERTISEMENT