Question

In: Mechanical Engineering

A rigid reservoir with 3 m3 volume is connected to a supply line. Initially the valve...

A rigid reservoir with 3 m3 volume is connected to a supply line.

Initially the valve is closed and the reservoir contains steam at 800 kPa, and x = 0.8 quality.

The valve is opened and steam is allowed until the final pressure is 2.5 MPa and 250 C.

a- Determine the mass of steam entered to the reservoir.

b- If the pressure is 3.5 MPa and temperature is 350 C at the supply line, evaluate the transferred heat in kJ, and determine the direction of the heat.

Solutions

Expert Solution


Related Solutions

A rigid reservoir with 3 m3 volume is connected to a supply line. Initially the valve...
A rigid reservoir with 3 m3 volume is connected to a supply line. Initially the valve is closed and the reservoir contains steam at 800 kPa, and x = 0.8 quality. The valve is opened and steam is allowed until the final pressure is 2.5 MPa and 250 oC. a- Determine the mass of steam entered to the reservoir. b- If the pressure is 3.5 MPa and temperature is 350oC at the supply line, evaluate the transferred heat in kJ,...
An insulated, rigid tank whose volume is 0.5 m3 is connected by a valve to a...
An insulated, rigid tank whose volume is 0.5 m3 is connected by a valve to a large vessel holding steam at 40 bar, 480°C. The tank is initially evacuated. The valve is opened only as long as required to fill the tank with steam to a pressure of 20 bar. Determine: (a) the final temperature of the steam in the tank, in °C, the final mass of the steam in the tank, in kg, and (b) the amount of entropy...
A rigid tank of volume 0.75 m3 is initially evacuated. A hole develops in the wall,...
A rigid tank of volume 0.75 m3 is initially evacuated. A hole develops in the wall, and air from the surroundings at 1 bar, 30°C flows in until the pressure in the tank reaches 1 bar. Heat transfer between the contents of the tank and the surroundings is negligible. Determine the final temperature in the tank, in °C.
An insulated, rigid vessel is initially empty (evacuated). However, it is connected to a steam line...
An insulated, rigid vessel is initially empty (evacuated). However, it is connected to a steam line that is maintained at 200 psia and 745 ∘ ∘ F. The valve is opened until the flow into the tank slows and stops (which occurs when the pressure in the tank is equal to the pressure in the steam line), at which point the valve is closed. What is the temperature within the vessel?
A rigid tank of volume 0.63 m3 initially has some air inside at 0.5 bar and...
A rigid tank of volume 0.63 m3 initially has some air inside at 0.5 bar and 300 K. A hole develops in the wall, and air from the surroundings at 1 bar, 300 K flows in until the pressure in the tank reaches 1 bar. Heat transfer between the contents of the tank and the surroundings is negligible. Determine the final temperature in the tank, in K. What is the entropy generation of the process? (Please treat the air as...
A rigid tank of volume 0.63 m3 initially has some air inside at 0.5 bar and...
A rigid tank of volume 0.63 m3 initially has some air inside at 0.5 bar and 300 K. A hole develops in the wall, and air from the surroundings at 1 bar, 300 K flows in until the pressure in the tank reaches 1 bar. Heat transfer between the contents of the tank and the surroundings is negligible. Determine the final temperature in the tank, in K. What is the entropy generation of the process? (Please treat the air as...
A rigid tank of volume 0.63 m3 initially has some air inside at 0.5 bar and...
A rigid tank of volume 0.63 m3 initially has some air inside at 0.5 bar and 300 K. A hole develops in the wall, and air from the surroundings at 1 bar, 300 K flows in until the pressure in the tank reaches 1 bar. Heat transfer between the contents of the tank and the surroundings is negligible. The final temperature is 350 K. Use the transient state entropy balcance to find the entropy generation of the process
A rigid tank of volume 0.3 m3 contains water initially at its critical point. The water...
A rigid tank of volume 0.3 m3 contains water initially at its critical point. The water is now cooled to 150°C a) What mass of water is in the tank? b) Has the average specific volume of this water changed during the cooling process? c) Find the mass of liquid water and the mass of water vapor in the tankat the end of the process. d) Find the volume of liquid water and the volume of water vapor in the...
An insulated rigid tank having a 0.2 m3 volume initially contains air at 400 kPa and...
An insulated rigid tank having a 0.2 m3 volume initially contains air at 400 kPa and 313 K. The amount of paddle-wheel work done on the system is 200 kJ. Calculate the nearest value of entropy change a. 0.66 kJ/K b. 0.88 kJ/K c. None d. 0.44 kJ/K e. 0.33 kJ/K
A volume of 8.62 m3 of air in a rigid, insulated container fitted with a paddle...
A volume of 8.62 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 322 K, 0.4 bar. The air receives 481 kJ by work from the paddle wheel. Assuming the ideal gas model with cv = 0.71 kJ/kg • K, determine for the air the amount of entropy produced, in kJ/K.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT