Question

In: Mechanical Engineering

(30%) Q5. Composition of gas in diesel engine after combustion engine is 5% oxygen, 20% carbon...

(30%) Q5. Composition of gas in diesel engine after combustion engine is 5% oxygen, 20% carbon dioxide, 15% water vapor, and remaining is nitrogen gas in volume. Temperature and pressure of the gas is 1800K and 6 MPa. This gas is isentropically expanded to the atmospheric pressure. Use air standard assumption.
a) Calculate the required properties of gas mixture (specific heats, gas constant, etc.)
b) Calculate the power generated expansion for per kg of mixture.
c) What is the temperature of gas after the expansion process.

Solutions

Expert Solution


Related Solutions

5. Consider the combustion of carbon monoxide (CO) in oxygen gas: 2CO(g) + O2(g) → 2CO2(g)...
5. Consider the combustion of carbon monoxide (CO) in oxygen gas: 2CO(g) + O2(g) → 2CO2(g) A. Calculate the number of moles of CO2 produced if 2.86 moles of CO is reacted with excess oxygen._______ moles CO2. B. Determine the moles of oxygen required to react with the CO._______ moles O2 6. Consider the following balanced chemical equation: C2H5OH(l) + 3O2(g) → 2CO2(g) + 3H2O(l) a. How many moles of CO2 form when 1.73 moles of C2H5OH react? ______ moles...
Complete combustion of methane When methane (CH4CH4) burns, it reacts with oxygen gas to produce carbon...
Complete combustion of methane When methane (CH4CH4) burns, it reacts with oxygen gas to produce carbon dioxide and water. The unbalanced equation for this reaction is CH4(g)+O2(g)→CO2(g)+H2O(g)CH4(g)+O2(g)→CO2(g)+H2O(g) This type of reaction is referred to as a complete combustion reaction. Part A Part complete What coefficients are needed to balance the equation for the complete combustion of methane? Enter the coefficients in the order CH4CH4, O2O2, CO2CO2, and H2OH2O, respectively. Express your answer as four integers, separated by commas (e.g., 1,2,3,4)....
A combustion reaction is described as a carbon source reacting with oxygen and producing carbon dioxide...
A combustion reaction is described as a carbon source reacting with oxygen and producing carbon dioxide and water. A common example of this reaction is methane reacting with oxygen gas in the following reaction: CH4 (g) + 2O2 (g) -> CO2 (g) + 2H2O (g) What would the standard entropy change be, if 20 g of methane reacted with 20 g of oxygen?
Determine what is the temperature of the hot combustion gas that is produced in the engine...
Determine what is the temperature of the hot combustion gas that is produced in the engine of a butanol (C4H9OH)-burning bus that uses ambient air for the combustion. Tip: write the balanced stoichiometric equation for the combustion of butanol assuming air is composed of 80% N2 and 20% O2 by volume, and derive the energy balance of the combustion. Atomic weights: C-12, H-1, O-16, N-14. For butanol: cp = 2 kJ/kg/°C; cv = 1.75 kJ/kg/°C; heat released by combustion, or...
Make an estimate of the composition of carbon, hydrogen, oxygen, and nitrogen in the dry mass...
Make an estimate of the composition of carbon, hydrogen, oxygen, and nitrogen in the dry mass of a bacterium. Using knowledge of the size and mass of a bacterium, the fraction of that mass that is "dry mass" (that is, ca. 30%) and the chemical constituents of a cell, figure out the approximate small integers (< 10) for the composition CmHnOpNq, that is, find m, n, p, and q.
Carbon, hydrogen, and oxygen are not the only elements that can be characterized by combustion analysis....
Carbon, hydrogen, and oxygen are not the only elements that can be characterized by combustion analysis. If a compound also contains sulfur or nitrogen, then it will form CO_2?2?? (from the carbon), H_2?2??O (from the hydrogen), N_2?2?? (from any nitrogen), and SO_2?2?? (from any sulfur). The amount of oxygen in the original sample is determined from subtracting the masses of the other elements from the total, as in the combustion analysis described earlier. If a 0.500 g sample of a...
1)Consider the combustion of carbon monoxide (CO) in oxygen gas: 2CO(g) + O2(g→2CO2(g) Starting with 3.82...
1)Consider the combustion of carbon monoxide (CO) in oxygen gas: 2CO(g) + O2(g→2CO2(g) Starting with 3.82 moles of CO, calculate the number of moles of CO2 produced if there is enough oxygen gas to react with all the CO. Answer in mol CO2 2)a) What is the Na+ concentration in each of the following solutions: 3.65 M sodium sulfate:2.18 M sodium carbonate:0.385 M sodium bicarbonate: What is the concentration of a lithium carbonate solution that is 0.395 M in Li+?...
a) An open cycle gas turbine engine consists of a compressor, a combustion chamber and a...
a) An open cycle gas turbine engine consists of a compressor, a combustion chamber and a two-stage turbine with a re-heater. The gas enters the compressor at a temperature of 15 C. The pressure ratio of the compressor, which is 90% efficient, is 12. The combustion gas enters the first stage turbine at 1100 C. Both stages of the turbine are 95% efficient. The first stage has a pressure ratio of 4, whereas that of the second stage is 3....
A gaseous compound has a composition by mass of 29.8% carbon, 2.1% hydrogen, and oxygen. The...
A gaseous compound has a composition by mass of 29.8% carbon, 2.1% hydrogen, and oxygen. The gas has a molar mass of about 50g/mol. Draw the most likely Lewis structure that fits these facts. Label each central atom with a hybridzation, bond angle, and Lewis notation. Indicate if the molecule has a dipole with an arrow, or else write that the molecule has no dipole.
1. The composition of a compound is 34.6% carbon, 3.9% hydrogen, and 61.5% oxygen . What...
1. The composition of a compound is 34.6% carbon, 3.9% hydrogen, and 61.5% oxygen . What is the empirical formula of the compound? 2. A mixture consisting of 15.0 g of iron(II) sulfate and 15.0 g of sodium phosphate is reacted in the following reaction: 3 F e S O 4 ( a q ) + 2 N a 3 P O 4 ( a q ) ⟶ F e 3 ( P O 4 ) 2 ( s )...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT