Question

In: Mechanical Engineering

What A laminated steel (E = 200 GPa and ? = 0.3) cylinder consists of a...

What A laminated steel (E = 200 GPa and ? = 0.3) cylinder consists of a jacket with an inside diameter of 200 mm and an outside diameter of 300 mm shrunk onto a tube with an inside diameter of 100 mm. The initial shrinkage pressure is 25 MPa.
Determine:

a. The maximum tensile stress in the cylinder after it is fabricated subject to an internal pressure of 200 MPa.

b. What and where is the maximum shear stress?

Solutions

Expert Solution

samet mamat answered 2 years ago
Next > < Previous

Related Solutions

A circular saw blade (E = 200 GPa, v = 0,3) can be considered as a...
A circular saw blade (E = 200 GPa, v = 0,3) can be considered as a 2 mm thick disc with an outer diameter of 600 mm and central hole of 100 mm diameter bolted to a rigid inner rotating disc. Determine the maximum rotational speed if initial yielding of the disc occurs for a Tresca yield stress of 200 MPa.
Towers for support of the electric lines are made of wood (as-grown or laminated), steel or...
Towers for support of the electric lines are made of wood (as-grown or laminated), steel or aluminum (either lattice structures or tubular poles), concrete, and occasionally reinforced plastics. What would you choose, and what constraints would you think must be met to select the best material? and what formulas should be used to choose the best material?
. Air in a 0.3 m3 cylinder is initially at a pressure of 10 bar and...
. Air in a 0.3 m3 cylinder is initially at a pressure of 10 bar and a temperature of 330 K. The cylinder is to be emptied by opening a valve and letting the pressure drop to that of the atmosphere. What will be the final temperature and mass of gas in the cylinder if this is accomplished: a) In a manner that maintains the temperature of the gas at 330 K? b) In a well-insulated cylinder (Answer: Tfinal =...
A cylinder of mass 0.3 kg and radius 8 cm (and I = 1/2 mR2 )...
A cylinder of mass 0.3 kg and radius 8 cm (and I = 1/2 mR2 ) is placed at the top of a long, straight ramp of length 2 meters. The cylinder is released from rest and allowed to roll without slipping to the bottom. When it reaches the bottom, it is rotating at a rate of 6.5 rev/s. Answers included. Need the process. a) What is the linear speed at the bottom of the ramp? 3.3m/s b) What is...
A mass of 0.3 kg of saturated refrigerant-134a is contained in a piston-cylinder device at 240...
A mass of 0.3 kg of saturated refrigerant-134a is contained in a piston-cylinder device at 240 kPa. Initially, 70 percent of the mass is in the liquid phase. Now heat is transferred to the refrigerant at constant pressure until the cylinder contains vapor only. (a) show the process on a P-v and T-v diagrams with respect to saturation lines. Determine; (b) the volume occupied by the refrigerant initially, (c) the work done, and (d) the total heat transfer.
A mass of 0.3 kg of saturated refrigerant-134a is contained in a piston-cylinder device at 240...
A mass of 0.3 kg of saturated refrigerant-134a is contained in a piston-cylinder device at 240 kPa. Initially, 70 percent of the mass is in the liquid phase. Now heat is transferred to the refrigerant at constant pressure until the cylinder contains vapor only. (a) show the process on a P-v and T-v diagrams with respect to saturation lines. Determine; (b) the volume occupied by the refrigerant initially, (c) the work done, and (d) the total heat transfer.
) A coaxial cable consists of a cylinder of radius ? surrounding by a thin cylindrical...
) A coaxial cable consists of a cylinder of radius ? surrounding by a thin cylindrical shell of radius 2?. Suppose the cable is along the ?-axis. The current density in inner cylinder is ? ⃗= (?0 + ??)?̂, where ?0 > 0 and ? > 0 are constant. The current in the outer shell, ?? ,is downward (−? direction). a) Find the magnetic field in regions 0 < ? < ?,? < ? < 2? and 2? < ?....
A cylindrical capacitor consists of a cylinder (of length L and radius a) with a total...
A cylindrical capacitor consists of a cylinder (of length L and radius a) with a total charge Q nested inside a thin conducting cylindrical shell (of length L and radius b) with total charge
A piston-cylinder assembly has initially a volume of 0.3 m3 of air at 25 oC. Mass...
A piston-cylinder assembly has initially a volume of 0.3 m3 of air at 25 oC. Mass of the air is 1 kg. Weights are put on the piston until the air reaches to 0.1 m3 and 1,000 oC, in which the air undergoes a polytropic process (PVn = const). Assume that heat loss from the cylinder, friction of piston, kinetic and potential effects are negligible. 1) Determine the polytropic constant n. 2) Determine the work transfer in kJ for this...
A piston-cylinder device initially contains 0.3 m3 of nitrogen gas at 350 kPa and 35 ℃.
A piston-cylinder device initially contains 0.3 m3 of nitrogen gas at 350 kPa and 35 ℃. An electric heater within the device is turned on and is allowed to pass a 240W for 6 minutes. Nitrogen expands at constant pressure, and a heat loss of 3000 J occurs during the process. Determine the final temperature of the nitrogen. (Average CP for Nitrogen is 1.039 kJ/kgK and molecular weight of Nitrogen is 28.01 kg/kmol.)  
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT