A bottle of concentrated aqueous perchloric acid, labeled 70% (w/w) has a concentration of 11.6M. What...

A bottle of concentrated aqueous perchloric acid, labeled 70% (w/w) has a concentration of 11.6M. What iis the density of 70% (w/w) HClO4?

Solutions

Expert Solution

70% (w/w) HClO4 solution means 70g of HClO4 present in 100g of solution

molarity = W*1000/G.M.Wt * volume of solution in ml

11.6 = 70*1000/100.46*volume of solution in ml

volume of solution in ml = 70*1000/100.46*11.6 = 60ml

mass of solution = volume of solution * density of solution

density of solution = mass of solution /volume of solution

= 100/60 = 1.67g/ml

density of HClO4 is 1.67g/ml >>>>answer

queen_honey_blossom answered 1 year ago

Next > < Previous

Related Solutions

Given the following information: Concentrated perchloric acid (HClO4) stock = 70% (w/w) Density of concentrated perchloric...

Given the following information: Concentrated perchloric acid (HClO4) stock = 70% (w/w) Density of concentrated perchloric acid (70% (w/w)) stock = 1.664 g/mL Molar mass of HClO4 = 100.46 g/mol a) You are asked to prepare a 300 mL solution of 400 mM perchloric acid (HClO4). What volumes (in mL) of concentrated HClO4 and water are required to make this solution? b) What volume (in L) of concentrated perchloric acid (HClO4) stock is required to make 500 mL of a...

A bottle of commercial concentrated aqueous ammonia is labeled 29.89 % NH3 by mass, density =...

A bottle of commercial concentrated aqueous ammonia is labeled 29.89 % NH3 by mass, density = 0.8960 g/ml. a. What is the molarity of the ammonia solution? b. If 250 ml of commercial ammonia is diluted with water to make 3.0 L of solution, what is the molarity of the diluted solution?

Concentrated sulfuric acid is 96.0% (w/w) sulfuric acid (H2SO4, MW = 98.1g/mol) and has a density...

Concentrated sulfuric acid is 96.0% (w/w) sulfuric acid (H2SO4, MW = 98.1g/mol) and has a density of 1.84 g/mL. Determine the volume needed to prepare 500 mL of a 1.00 M solution.

Calculate the molarity of a solution made by adding 39.2 mL of concentrated perchloric acid (70.5...

Calculate the molarity of a solution made by adding 39.2 mL of concentrated perchloric acid (70.5 % by mass, density 1.67 g/mL) to some water in a volumetric flask, then adding water to the mark to make exactly 2000 mL of solution. (It is important to add concentrated acid or base to water, rather than the other way, to minimize splashing and maximize safety.) [ HClO4]= _____M

According to the label on a bottle of concentrated hydrochloric acid, the contents are 36.0% HCl...

According to the label on a bottle of concentrated hydrochloric acid, the contents are 36.0% HCl by mass and have a density of 1.18 g/mL. What is the molarity of concentrated HCl? What volume of it would you need to prepare 759 mL of 2.00 M HCl? What mass of sodium bicarbonate would be needed to neutralize the spill if a bottle containing 1.75 L of concentrated HCl dropped on a lab floor and broke open?

1) Beginning with 1.0 g of trans-stilbene, 2.0 mL of concentrated aqueous HBr (45% w/w) and...

1) Beginning with 1.0 g of trans-stilbene, 2.0 mL of concentrated aqueous HBr (45% w/w) and 1.6 mL of 30% w/w hydrogen peroxide, identify the limiting reagent and calculate the theoretical yield of the 1,2 dibromoalkane. If you isolated 0.95 g of 1,2-dibromo-1,2-diphenylethane, what would be your percent yield?

Question