Question

In: Mechanical Engineering

Tests done on a scale model of a turbine diameter 0.3m gave a max. efficiency of...

Tests done on a scale model of a turbine diameter 0.3m gave a max. efficiency of 83% at 900rev/minute with a guide vanes 75% open and pressure head of 20m. The power developed was 28.5KW A geometrically similar turbine has to produce 375kW at 75% vane opening but under a head of 26m Calculate 1) the diameter 2)the rotational speed of the full scale turbine hint assume the efficiencies of both machines to be the same

Solutions

Expert Solution


Related Solutions

A model of a Francis turbine is built to a scale of one fifth of full size and when tested it developed a power output of 3 kW under a head of 1.8 m of wate
A model of a Francis turbine is built to a scale of one fifth of full size and when tested it developed a power output of $3 \mathrm{~kW}$ under a head of $1.8 \mathrm{~m}$ of water, at a rotational speed of $360 \mathrm{rev} / \mathrm{min}$ and a flow rate of $0.215 \mathrm{~m}^3 / \mathrm{s}$.Estimate the speed, flow rate, and power of the full-scale turbine when working under dynamically similar conditions with a head of $60 \mathrm{~m}$ of water. By making...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT