A solid cylindrical shaft, 3 in. dia. 20 in. long, is used for the transmission of...

A solid cylindrical shaft, 3 in. dia. 20 in. long, is used for the transmission of mechanical power at a rate of 50 hp running at 1300 rpm. The modulus of rigidity for the material used is 16 × 10⁶ psi. Calculate:

the shear stress acting on the shaft;
the torsional deflection of the shaft.

Solutions

Expert Solution

Answer with details explanation with serial page number

samet mamat answered 1 year ago

Next > < Previous

Related Solutions

True or False: 1. Keys are used to enable transmission of torque from the shaft to...

True or False: 1. Keys are used to enable transmission of torque from the shaft to the shaft supported elements. 2. For the same bore diameter, a cylindrical roller bearing generally has a lower load carrying capacity than ball bearings. 3. Thrust bearings are suitable for supporting both axial and radial loads. 4. Typical bearing failures are due to excessive static stresses. 5. According to the seminar presentations, materials for joint replacements are selected on basis of the loading as...

The current density inside a long, solid, cylindrical wire of radius a = 5.0 mm is...

The current density inside a long, solid, cylindrical wire of radius a = 5.0 mm is in the direction of the central axis and its magnitude varies linearly with radial distance r from the axis according to J = J0r/a, where J0 = 220 A/m2. Find the magnitude of the magnetic field at a distance (a) r=0, (b) r = 2.7 mm and (c) r=5.0 mm from the center.

A very long coaxial cable consists of a solid cylindrical inner conductor of radius 3.8mm ,...

A very long coaxial cable consists of a solid cylindrical inner conductor of radius 3.8mm , surrounded by an outer cylindrical conductor with inner radius 7mm , and outer radius 9.3mm . The region between the two conductors is filled with a waxlike insulating material to keep the conductors from touching each other. The inner conductor carries a current 4.65A , into the page, while the outer conductor carries a current 4.6A , out of the page. Part A Use...

An infiinitely long solid conducting cylindrical shell of radius a 4.6 cm and negligible thickness is positioned with...

An infiinitely long solid conducting cylindrical shell of radius a = \(4.6 \mathrm{~cm}\) and negligible thickness is positioned with its symmetry axis along the z-axis as shown. The shell is charged, having a linear charge density \(\lambda_{\text {inner }}=-0.37 \mu \mathrm{C} / \mathrm{m}\). Concentric with the shell is another cylindrical conducting shell of inner radius \(\mathrm{b}=\) \(12.6 \mathrm{~cm}\), and outer radius \(\mathrm{c}=14.6 \mathrm{~cm}\). This conducting shell has a linear charge density \(\lambda_{\text {outer }}=0.37 \mu \mathrm{C} / \mathrm{m}\).

A nuclear fuel element is in the form of long solid cylindrical rod (k=0.85 W/mK) of...

A nuclear fuel element is in the form of long solid cylindrical rod (k=0.85 W/mK) of diameter 14 mm is generating heat at an uniform rate of 0.45×108 W/m3 because of nuclear fission. Heat is transfer to pressurized cooling water at 300 0C and surface heat transfer coefficient is 4500 W/m2k. calculate the maximum temperature in the fuel rod in the system. What is the change in Tmax if the fuel element is encapsulated in a thin metal cladding of...

The diameter of a cylindrical shaft door hinge is normally distributed with a population mean of...

The diameter of a cylindrical shaft door hinge is normally distributed with a population mean of 12.8 mm and a standard deviation of 0.35 mm. The specifications on the shaft are 13 ± 0.15 mm. What proportion of shafts conforms to the specifications?

A steel shaft is to be manufactured either as a solid circular bar or as a...

A steel shaft is to be manufactured either as a solid circular bar or as a circular tube. The shaft is required to transmit a torque of 1200 N_m without exceeding an allowable shear stress of 40 MPa nor an allowable rate of twist of0.75°/m. (The shear modulus of elasticity of the steel is 78 GPa.). Determine the required outer diameter do of the solid shaft [58.8 mm] Determine the required diameter d2of the hollow shaft if thethickness t of...

An infinitely long solid cylindrical insulator of radius 13.0 cm has a non-uniform volume charge density...

An infinitely long solid cylindrical insulator of radius 13.0 cm has a non-uniform volume charge density of =4r3 where is in Cm3 when r is in meters. Calculate the magnitude of the electric field at a distance of 17.00 cm from the axis of the cylinder.

A power train application requires the coupling of a spur gear to a transmission shaft operating...

A power train application requires the coupling of a spur gear to a transmission shaft operating at 3600RPM. The coupling must sustain a mean torque loading of 215Nm. There is a 20% torque ripple introduced to the drive line from the load. Select and design a coupling system using either a keyed coupling or an interference coupling such that the section of the transmission shaft at that location is minimized. Assume that the gear is located at the midpoint of...

How does a capacitance affect Long Transmission lines? If the receiving end of the long transmission...

How does a capacitance affect Long Transmission lines? If the receiving end of the long transmission is open circuited, is there a current flow at the sending end?

Subjects