a. Signal conditioning circuits are used to process the output signal from a sensor of a...

a. Signal conditioning circuits are used to process the output signal from a sensor of a measurement system to be suitable for the next stage of operation. Discuss any four of these processes. (12Marks)
b. To eliminate short term fluctuation of signals and provide smoother form of signal, low pass filters are use. Using a passive low pass RC filer having R= 500Ω, and C=50mF, draw the frequency response graph using a range of frequencies from ??=0.01rad/s to ??=1000 rad/s.

Expert Solution

PLEASE UPVOTE

Manojponduru answered 2 years ago

Identify and explain the type of signal conditioning being used: amplifier, Filter, Signal Isolation

The signal output from a certain process in an industry is described by the following equation...

The signal output from a certain process in an industry is described by the following equation h (t) = 5 cos 2π1000 t + 7 cos 2π 2000 t + 2 cos 2π 3000 t. Suggest any two remedial measures to avoid any problems that occurred during the reconstruction process.

Chlorodifluoromethane (CHF2Cl) was widely used in the compression/cooling circuits of refrigeration or air-conditioning systems. Since the...

Chlorodifluoromethane (CHF2Cl) was widely used in the compression/cooling circuits of refrigeration or air-conditioning systems. Since the discovery that such compounds (HCFCs and CFC's) released into the atmosphere were a major cause of depletion of stratospheric ozone, newer refrigeration systems make use of certain hydrofluorocarbons (HFCs), which are degraded in the lower atmosphere, instead. Often, mixtures of such compounds are used. Suppose a sample of refrigerant gas consisting of a simple mixture of the gases pentafluoroethane (C2HF5) and difluorormethane (CH2F2) has...

How can a protein act as a signal integrating sensor?

How many types of signal threshold in cognitive radio sensor networks? Explain?

1. Interference is present in a signal cable of a temperature sensor which is running next...

1. Interference is present in a signal cable of a temperature sensor which is running next to a power cable in the tray. Describe the different type of noise coupling paths possible and how you can solve or minimize the coupling.

Signal transduction refers to any process of changing one signal to signal of another type. An...

Signal transduction refers to any process of changing one signal to signal of another type. An example would be a series of pulsing lights into the sound for the word: "Help". Discuss how this transduction could be done by a device.

Describe the drive system used by the robot including the type of sensor Any robot from...

Describe the drive system used by the robot including the type of sensor Any robot from any brand: FANUC Yaskawa Motoman ABB KUKA

In an FIR digital filter, each sample in the output signal is found by multiplying M samples from the input signal by M predetermined coefficients, and adding the products.

In an FIR digital filter, each sample in the output signal is found by multiplying M samples from the input signal by M predetermined coefficients, and adding the products. The characteristics of these filters (high-pass, low-pass, etc.) are determined by the coefficients used. For this problem, assume M = 5000, and that single precision floating point math is used. a. How many math operations (the number of multiplications plus the number of additions) need to be conducted to calculate each...

A sensor is used to calculate the kinematic attitude of a satellite with respect to a...

A sensor is used to calculate the kinematic attitude of a satellite with respect to a reference frame. Two stars are observed by the sensor, S1 and S2. In the reference frame, S1 has coordinates (0, 1, 0) and S2 has coordinates (-1, 0, 0), the three coordinates represent the i,j,k directions in the reference frame. In the body frame, S1 has coordinates (1 ,0, 0) and S2 has coordinates (0, 1, 0), the three coordinates represent the iB,jB,kB directions...

Question