A uniform stick 1.3 m long with a total mass of 270 g is pivoted at...

A uniform stick 1.3 m long with a total mass of 270 g is pivoted at its center. A 3.8-g bullet is shot through the stick midway between the pivot and one end. The bullet approaches at 250 m/s and leaves at 140 m/s. With what angular speed is the stick spinning after the collision?

Solutions

Expert Solution

genius_generous answered 1 month ago

Next > < Previous

Related Solutions

A thin 1.5-m-long uniform rod with a total mass of 1650 g is suspended vertically at...

A thin 1.5-m-long uniform rod with a total mass of 1650 g is suspended vertically at the upper end. The moment of inertia of the rod in respect to the center of mass is mL2/12 (where L is the total length of the rod). A 12-g bullet is shot to the lower end of the rod and embeds there. The bullet speed before impact is 380 m/s. Calculate the amount of energy transferred to the heat during the collision.

A uniform disk with mass 8.5 kg and radius 8 m is pivoted at its center...

A uniform disk with mass 8.5 kg and radius 8 m is pivoted at its center about a horizontal, frictionless axle that is stationary. The disk is initially at rest, and then a constant force 31.5N is applied to the rim of the disk. The force direction makes an angle of 35 degrees with the tangent to the rim. What is the magnitude v of the tangential velocity of a point on the rim of the disk after the disk...

A uniform stick, mass m and length l, is placed in a horizontal plane by hanging...

A uniform stick, mass m and length l, is placed in a horizontal plane by hanging it from a massless string attached to the center. A ball of mass M moving with speed V in the plane of the stick. The ball strikes the stick at a distance d from the center. the collision is elastic. Find the resulting translational and rotational speeds of the stick and the resulting speed of the ball. show that the relative speed of the...

Two people are carrying a uniform 3 m long steel beam that has a total mass...

Two people are carrying a uniform 3 m long steel beam that has a total mass of 32.1 kg. One person is supporting it at the far left end with an upward force of 120 N, while the second one is supporting it somewhere near the right end with an unknown force. How much force is required from the second person in order to balance the beam? H ow far from the right end must the second person lift in...

A thin uniform pole of length 30 m is pivoted at the bottom end. Calculate the...

A thin uniform pole of length 30 m is pivoted at the bottom end. Calculate the most probable point of rupture on the pole as the pole falls. STEP BY STEP PLEASE I am trying to understand this.

A uniform disk with mass 38.9 kgkg and radius 0.300 mm is pivoted at its center...

A uniform disk with mass 38.9 kgkg and radius 0.300 mm is pivoted at its center about a horizontal, frictionless axle that is stationary. The disk is initially at rest, and then a constant force 31.5 NN is applied tangent to the rim of the disk. 1. What is the magnitude v of the tangential velocity of a point on the rim of the disk after the disk has turned through 0.260 revolution? Express your answer with the appropriate units....

A uniform beam is 5.00 m long and has a mass of 53.0 kg. The beam...

A uniform beam is 5.00 m long and has a mass of 53.0 kg. The beam is supported in a horizontal position by a hinge and a cable, with angle ? = 115°. (a) Draw all the forces acting on the beam. (b) Label the axis of rotation and the position vectors of each point of action. (c) What is the tension on the cable? (d) What are the magnitude of the vertical and horizontal forces acting on the hinge?...

A uniform helicopter rotor blade is 8.97 m long, has a mass of 104 kg, and...

A uniform helicopter rotor blade is 8.97 m long, has a mass of 104 kg, and is attached to the rotor axle by a single bolt. (a) What is the magnitude of the force on the bolt from the axle when the rotor is turning at 329 rev/min? (Hint: For this calculation the blade can be considered to be a point mass at its center of mass. Why?) (b) Calculate the torque that must be applied to the rotor to...

A uniform brass solid cylinder has a mass, m = 500 g, and a diameter, D...

A uniform brass solid cylinder has a mass, m = 500 g, and a diameter, D = 6 cm and a length L = 1 m. The cylinder rotates about its axis of rotational symmetry at an angular velocity of 60 radians/s on a frictionless bearing. (a) What is the angular momentum of the cylinder? (b) How much work was required to increase the angular momentum of the cylinder to this value if the cylinder was initially at rest? Once...

Procedure M=270 g (hanger +220g); Tape the 220 g to the hanger that is 50g m=250g...

Procedure M=270 g (hanger +220g); Tape the 220 g to the hanger that is 50g m=250g (hanger +200g); Tape the 200 g to the hanger that is 50g Set the apparatus so that when m is on the floor, M is at height h=1.50m; Make sure you measure and record the actual value of h that you use. Release the system from rest and measure the time taken for m1 to fall on the floor. SAFETY – When M hits...

Subjects